Custom Metal Menu Holder
So you want a sample made of the original Restaurant Menu Stands or do you need a replia menu holder for your Restaurant?
do not worry about the paint - they will all eventually wear to the bare metal but there is a coating that can be applied to limit it. You can send the original menu holder to us by EXPRESS,
we will look into the pricing to see if there will be any change going back to the original style. we will let you know if we need another prototype depending on what the
customer is comfortable with.and the additional cost to apply an extra coating to prevent the wear? if you would like the height of this holder reduced by ½” or more,
Please let's know and we will send two prototype units again..
It is custom metal menu holder,if you need a similar menu holder,here is more details for your reference.
4” x 4” x .12 thick base with two ¼” diameter rods x 7” tall, welded to base with an additional ¼” diameter rod welded to top of two 7” tall rods.
All materials are steel with a powder coated white finish.
They will put these periodically in their dishwashers. Also please be aware of any regulations there may be in regards to standards to be meet for items like this in restaurants
if There was a reason for the extension on the top pole that you asked us
to remove or any change similar,we will do and you will have a totally customized menu holder as your like.
When we put the rings on now they slide off. or you can ask your customer to look at the samples we have to make sure everything else is alright and if so we think your should get another prototype with the
original sample which we will sent to you.
|Stainless Steel Menu Stand | Custom Metal Menu Holder| Plastic Menu Holders|
All rights reserved. Copyright © 2015 Website is design by KMH Enterprise.